Cara Panduan Radio Alinco DR-135

Radio Allinco Seri DR-135 adalah sejenis radio berfrekuensi VHF FM Transceiver dimana radio ini biasa digunakan untuk pengiriman berita antar instansi ataupun perorangan ya seperti handy talky tetapi ini lebih canggih dan memiliki jarak tempuh yang jauh sesuai tinggi antena dan frekuensinya. Frekuensi  berkisar antara 136-174 Mhz ( DR-135 ), berikut panduan memasang maupun menggunakan Radio Allinco seri DR oh iya sekali - kali saya menulis berbahasa Inggris aja yah hehehe...biar gaya sedikit:

Initial Installation

• Connect the microphone to the front panel of the transceiver

• Connect antenna port to a 50 ohm antenna that is tuned to the band, using good quality 50 ohm coaxial cable

For a base station set up

• The transceiver requires a 12-13,8 VDC negative grouunded power source. 

• Use a regulated power supply capable of providing continuous current of 12A or more. 

• Power Supplies that do not meet those specifications may cause malfuncion and / or damage to the radio and will void the warranty. 

• Allinco offer excellent communication - grade power supplies as optional accessories.

Part Name and Functions

Coution: the body (heatsink) of this product may become very hot during / after the operation. Never toutch the unit until it cools down.

*when a transceiver is powered from an external DC power source ( adapter, power supply, cigar- plug etc ).

Front Panel

Primari Functions
No	Key	Function
1	PWR	Power turns ON / OFF whenever the key is pressed
2	Volume Knop	Adsjusts the AF audio level
3	Dial	Changes the frequency, memory channel and scan direction
4	FUNC/SET	Sets the function mode to access additional settings
5	V/M/MW	Switches between VFO mode and memory mode
6	MHZ/SHIFT	Changes the frequency in  1 MHz steps
7	TS/DCS/LOCT	Sets the tone squelch and DCS setting
8	CALL/H/L	Switches to Call mode
9	SQL/D	Sets the squelch level
10	Data Terminal	Used in clone and thelf alarm functions
11	TX Light indicator	Lights during transmission
12	Mic. Connector	Connection port for supplied microphone
Function which can be activated while F appears after pressing the Func Key
No	Key	Function
4	FUNC/SET	Confirms selection of other functions and exits the function mode
5	V/M/MW	Programs the data in to memory channel
6	MHZ/SHIFT	Sets the shift direction and the offset frequency
7	TS/DCS/LOCK	Sets the key lock function
8	CALL/H/L	Switches between HI, MID, and LOW power transmission
9	SQL/D	Acceses the packet communication mode. (T/E models only )

Functions that can be activated while pressing the FUNC Key

No	Key	Function
4	PWR	Reset to factory default settings
5	V/M/MW	Erase the Memory
6	MHZ/SHIFT	Switches to wide / narrow mode
7	TS/DCS/LOCK	Sets the auto dialer
8	CALL/H/L	Accesses the clone function mode
9	SQL/D	Acceses the power supply voltage indication mode

Functions that require continuous pressing to be activated

No	Key	Function
4	FUNC/SET	When pressed for 2 seconds, accesses the set mode
6	MHZ/SHIFT	When pressed, within 1 second the scan start
9	SQL/D	When pressed, within 1 second the monitor function is on

baiklah untuk sementara ini dulu yang bisa saya uraikan dilain kesempatan saya uraikan kembali ya..cos dah malam nih mo istirahat